fencing at catlle camp

giraffe ran trough the fence and +- 200m was broken. we removed the broken fence and rolled it up. we took new wire and stretched it the +- 200m and used the wire puller  to tie it. we did it 15 times for 15 wires. we used binding wire to tie the wire tightly to the droppers and y-standers. we use one height for every line to keep it straight. all the offcuts needs to be picked up because its a big hazard. animals can get hurt and tires can get punctures and its for neatness as well. one wire snapped and we used the wire puller to get the ends back together and used gripples to keep them together or we used a 90*. we used a hummer to put the droppers in place and pliers to tie the binding wire to the y-standers and droppers. we used side cutters to cut the old wire off. we used the wire puller to pull all the wires tightly. if you want to start you need to clean the area first so that there is nothing in the way. you need to mark the spots where you want to set up your fence. make sure there is no bushes in the way. all the poles need to be the same level so when the fence line gets erected it is in one line and not different levels. you need corner poles and y-standers and droppers to set up a fence..